CocoChlo’s Christmas Advent Calendars – Take Two!

Ok so hopefully you have read my last blog about how to make Advent Calendars and thought it was a really good idea (hopefully!) but something which is quite complicated, time consuming and perhaps a bit on the expensive side.

The first year I made the advent calendars I made three – one for each of my two Sisters and one for myself – I had hoped to make more but the time and money involved in making them meant I had left it too late for that year.

The following year I decided to make a further three – one for hubby, one for my brother in law and one for my Mum, so all six of us had our own calendars.

I wanted the second batch of calendars to be different from the first (and hopefully more simple to make!) so I set about creating a new design.

Just something to note – some of the pictures in this blog show the original base size, which we decided to cut down after a few days because the calendars were too difficult to move and wouldn’t fit through our loft hatch when they needed to be put away!!! Of course you can have the bases bigger if you want.

The base sizes eventually measured 60cm long by 35cm wide and were again cut out of 2cm thick MDF which I bought from B&Q. I bought a sample size of black paint to paint each of the bases, but of course you can use any colour you want.

image

I ordered several small sized Christmas trees from eBay (I think the trees were three foot high). The trees arrived and had a tripod style base which you put the metal rod in to stand them up. The original plan was to fix the tripod stand to the wooden base and then to cover the tripod bit with some Christmassy material (known elsewhere as a “tree skirt”, not joking!)

IMG_7462I tried to glue the tripod plastic base to the rectangle wooden base but this didn’t work very well as not much of the material was flat to the base to be able to glue it. To make matters worse, when I thought I had finished making the trees and filled the advent boxes and started hanging them on the tree, the metal pole acting as the trunk of the tree started to bow under the weight! I hadn’t even put all the advent boxes on so I knew I needed a plan B!

My Mum had recently had a log burner installed in her home so had a huge pile of pre-cut logs which were ready to go onto the fire. I stole a few of these logs and hubby drilled a hole in the centre of the log and we forced the metal rod “trunk” of the tree as far down as possible and then sealed it with very strong glue (we used Gorilla glue but for gods sake be careful with this stuff, especially if you have kids around!) The log we used was around 23cm in height, just to give you some idea.

This seemed to do the trick and held the weight of the Christmas tree just fine so I nailed and glued the log to the black base and let it dry for at least 24 hours.

After that comes the fun bit! The decorating!

To decorate the calendars I got most of my bits and pieces on eBay – these are the items I ordered but of course you can decorate yours however you want –

  • Glitter star toppers in red, gold and silver (£5.99 each)
  • Wooden names for the bases (the prices of these depend on how many letters each name has, for example, £3.00 for five letters and £4.20 for seven letters)
  • Red, gold and silver glitter paints (£5.69 each pot)
  • Red, gold and silver glitter LED candles (£5.99 for a pack of 12 in one colour)
  • Velcro dots to attach the LED candles to the felt (£3.65 a pack)
  • Pack of 25 Advent Boxes (£10 from Next)
  • A set of two glitter reindeers in gold, silver and red (£4.00 for the pair)

I painted the wooden names with the glitter paint first of all – a word of warning, you may want to put an undercoat of a matching or contrasting colour underneath your glitter paint as it took many many layers before it started to build up the glitter colour. To be honest, even after several coats, I still wasn’t particularly happy with the colour and amount of glitter, particularly as this paint is quite expensive.

image

Once you have painted the name plaque, glue it onto the base alongside your other decorations like your reindeer and LED candles.

I also bought a pack of battery operated fairy lights for £1 from the Poundshop and wrapped them round the tree to make it look a bit more authentic!

Then fill your advent boxes with whatever you fancy (see below for some ideas!) and then hang on your tree ready to be found!!!

IMG_0928

IMG_0929

IMG_5526

IMG_5529

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s